Price: $750.00

These carbon fiber shift paddles are modeled after the superior 360 F1 shift paddles.  The tips are larger for better control, and center sections curve elegantly toward the mounting face, which is unique to the F355.  These paddles feature durable, high gloss urethane clear coat that feels great and looks even better. The backsides of the paddles have the same type of raised lip as the stock paddles, while the front sides are polished to a mirror-like shine. They are sold as a pair, and will fit on Ferrari 355 F1 cars using stock fasteners. “Down” and “Up” text, applied underneath clearcoat, is optional.

Price: $850.00

Inspired by the F1 paddles on the 360 Challenge Stradale and Enzo, these carbon fiber paddles feature tips that are approximately 1 inch longer in the vertical direction. They have a thick, durable urethane clear coat that feels great and looks even better. The backsides of the paddles have the same type of raised lip as the stock paddles, while the front sides are polished to a mirror-like shine. They are sold as a pair, and will fit on 355 F1 cars using stock fasteners. “Down” and “Up” text, applied underneath clearcoat, is optional.

Price: $1725.00

Replacing our previously offered individual shifter, climate, and ashtray panels, this one-piece unit provides an incomparably elegant solution for those desiring center console panel replacement. This carbon fiber panel is a direct replacement for the stock plastic parts, which are prone to warping and turning "gummy".  The console comes with pre-drilled attachment holes, and molded-in mounting studs on the backside of the part.  It fits all models and years of the Ferrari 355, with no modifications to either the part or the vehicle.  The stock shift gate, climate control knobs, 12 volt power adapter, and all buttons fit securely in place with stock hardware.  Console attaches to vehicle with stock hardware.  Thick urethane clear coat provides incredibly smooth, deep gloss and excellent durability. Available in left-hand-drive and right-hand-drive versions, and manual and F1 versions. Holes for the crossed flags emblem can be pre-drilled on the ashtray lid, upon request.

Price: $1800.00

This carbon center console is a direct replacement for the stock leather-covered fiberglass part.  The console comes with threaded metal mounting points attached to the underside of the part, as well as pre-drilled hardware holes.  It has no exposed metal screw heads or mounting hardware on the outside surfaces. It is available in versions for the Ferrari F355 Coupe, GTS, and Spider, and accommodates F1 and Manual models with no modifications to either the part or the vehicle.  The stock shifter, climate control, and ashtray, panels fit securely in place with stock fasteners, which are also used for the console-to-vehicle attachment.  Or, for maximum visual appeal, combine this console tunnel with our F355 Integrated Center Console Panels which will also fit perfectly into the top. Thick urethane clear coat provides an incredibly smooth, deep gloss and excellent durability.

Price: $450.00

This carbon fiber stereo/instrument console is a direct replacement for the stock plastic part, which is prone to warping and turning "gummy".  The console comes with pre-drilled attachment holes, and molded-in mounting studs on the backside of the part.  It fits all models and years of the Ferrari 355, with no modifications to either the part or the vehicle.  The stock gauges and stereo head fit securely in place with stock hardware.  Console attaches to vehicle with stock hardware.  Thick urethane clear coat provides incredibly smooth, deep gloss and excellent durability.

Price: $250.00

This carbon fiber Gauge Cluster Panel provides an easy yet top quality solution for upgrading the look of the primary gauge pod.  It fits all models and years of the Ferrari 355, worldwide, with no modifications to either the part or the vehicle.  Unlike all of our other parts which replace the original, the Gauge Cluster Panel fits over top of the existing plastic gauge panel, and attaches to vehicle with supplied double-sided mounting tape.  All warning lights remain visible to the bottom and sides of gauge panel.  No tools are needed; it is not necessary to move the steering wheel or remove any hardware from the car.  Thick urethane clear coat provides incredibly smooth, deep gloss and excellent durability.

Price: $275.00

This carbon fiber side mirror trim is a direct replacement for the stock metal triangles on the inside of the side view mirrors. Comes with pre-drilled mounting holes, allowing quick installation with stock hardware. Available for all F355 models.

Price: $720.00

These carbon fiber door sills are a direct replacement for the stock steel sills, which frequently become dented and rusty.  The sills come with pre-drilled attachment holes and top-quality 3M mounting strips along the outboard edge.  They fit all versions of the Ferrari 355, with no modifications to either the part or the vehicle.  The sills now feature a longitudinal crease similar to the style featured in the Fiorano edition.  They do not include the down-turned outboard lip which tends to trap water.  Thick urethane clear coat provides incredibly smooth, deep gloss and excellent durability.

Price: $675.00

These carbon fiber engine bay panels replace the 355's stock metal panels, which are often bent or missing from used vehicles.  They are available for the F355 B, TB, and Spider, with Manual and F1 transmissions.  Panels come with pre-drilled mounting holes, and oil-resistant foam rubber trim.  Rivet holes for mounting engine information plates are optional.  Information plates are pictured, but not included.  Panels are sold as a pair.

Price: $1100.00

These Kevlar-reinforced carbon fiber rear diffusers replace the flimsy plastic stock diffusers, which tend to break after light impacts with inclined driveways and road debris. They come with pre-drilled mounting holes, and attach with stock fasteners. They are finished with a proprietary abrasion-resistant clear surface coating instead of the urethane clear coat found on most other Valence carbon fiber parts. Diffusers are sold as a pair.